A1 Roofing Romford

Are you looking to add some natural light and ventilation to your home in Havering? Installing a Velux window on your tiled roof can be a great way to achieve this. In this article, we will guide you through the process of fitting a Velux window to a tiled roof, highlighting the key steps and considerations to ensure a successful installation.

Before you start the installation process, it's essential to choose the right Velux window for your needs. Consider the size, style, and features you require, such as blinds or a top-hung sash. Make sure to select a window that is compatible with your roof type and pitch.

Before installing the Velux window, inspect your roof to ensure it is in good condition. Check for any damaged or missing tiles, and repair or replace them as necessary. Ensure the roof is clean and clear of debris.

Measure the width of the Velux window and mark the center point on the roof. Use a spirit level to ensure the mark is straight and level. Measure the distance from the center point to the edge of the roof, and mark the location of the window's frame.

Use a tile saw or a circular saw to cut a hole in the roof, following the marked lines. Be careful not to damage the surrounding tiles. Remove the cut tiles and set them aside for later use.

Create a gap of approximately 10-15 mm between the roof tiles and the Velux window's frame. This gap will allow for expansion and contraction of the window and roof.

Place the Velux window's frame into the hole, ensuring it is level and secure. Use a spirit level to check the frame's position. Install the window's sash and blinds, following the manufacturer's instructions.

Apply insulation around the window's frame, ensuring a snug fit. Install flashing around the window, overlapping the tiles to prevent water ingress.